User Name
Password
 
  Roll the lastest Company Message


ELENC BeeProg Extremely fast Universal programmer USB
ELENC BeeProg Extremely fast Universal programmer USB>>
Product Name: ELENC BeeProg Extremely fast Universal programmer USB
Part No.: F012
Price:
US 440
Net Weight: 4.00KG
Qty:PCS
For purchase of Qty 3 or more,special price would be 418 USD pet unit

Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family

-specific module. You have freedom to choose the optimal device for your design. Using built-in in-circuit serial

programming (ISP) connector, the programmer is able to program ISP capable chips in circuit.
General information
. 31728 supported devices by 2.38 version of SW (10. May. 2007)
extremely fast programming, one of the fastest programmers in this category.
. Programs 16-Mbit Flash memory less than 18 seconds
. 48-pins powerful pindrivers, no adapter required for any DIL devices
. connector for in-circuit programming (ISP)
. dual connection to PC: USB or parallel (printer) port
. USB 2.0/1.1 compatible interface
. alternatively high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface
. comfortable and easy to use control program, Windows 95/98/Me/NT/2000/XP/2003/XPx64 compatible
. Multiprogramming possible by attaching more programmers to one PC
. approved by CE laboratory to meet CE requirements
. warranty - 3 years
Features
. First member of new USB-compatible generation of Windows 95/98/ME/NT/2000/XP/2003/XP64 based

ELNEC universal programmers
. built to meet the strong demand of the developers community for the fast and reliable universal

programmer.
. Supports all kinds of types and silicon technologies of today and tomorrow programmable devices

without family-specific module. You have freedom to choose the optimal device for your design.
. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP

capable chips in circuit.
BeeProg isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows

generation of user-definable test pattern sequences.
. Provides very competitive price coupled with excellent hardware design for reliable programming.

Probably best "value for money"programmer in this class.
. Very fast programming due to high-speed FPGA driven hardware and execution of time-critical routines

inside of the programmer. At least fast than competitors in this category, for many chips much faster than most

competitors. As a result, when used in production this one-socket-programmer waits for an operator, and not the

other way round.
. BeeProg interfaces with the IBM PC 486 compatible or higher, portable or desktop personal computers

through USB (2.0/1.1) port or any standard parallel (printer) port. Programmer also supports IEEE1284 (ECP/EPP)

high-speed parallel port.
. Support of both USB/LPT port connection gives you the choice to connect the BeeProg programmer to

any PC, from latest notebook to older desktop without USB port.
Specifications
Base unit, DACs
. USB 2.0 port
. FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
. on-board intelligence: powerful microprocessor and FPGA based state machine
. three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
. VCCP range 0..8V/1A
. VPP1, VPP2 range 0..26V/1A
. autocalibration
. selftest capability
. protection against surge and ESD on power supply input, parallel port connection
ZIF socket, pindriver
. 48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 48-pin
. pindrivers: 48 universal
. VCCP/VPP1/VPP2 can be connected to each pin
. perfect ground for each pin
. FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
. analog pindriver output level selectable from 1.8 V up to 26V
current limitation, overcurrent shutdown, power failure shutdown
ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
. continuity test: each pin is tested before every programming operation
ISP connector
. 10-pin male type with missinsertion lock
. 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle

all (low-voltage including) devices.
. 1x VCCP voltage (range 2V..7V/100mA), can be applied to pins 1, 3
. programmed chip voltage (VCCP) with both source/sink capability and voltage sense
. 1x VPP voltage (range 2V..25V/50mA), can be applied to pins 2,3,4,6,8,10
. target system supply voltage (range 2V..6V/250mA)
Packing List
. BeeProg programmer
. switching power adapter 100..240V AC/15V DC/1A
. connection cable PC-programmer, LPT port
. connection cable PC-programmer, USB port
. ISP cable
. diagnostic POD for selftest of the programmer
. anti-dust cover for ZIF socket
. user manual
. software
. registration card
. calibration test report
. transport case

 

© 2001-2006 uiftech.cn All Rights Reserved.
All logos and trademarks in this site are property of their respective owners.

MSN Chat
Linda
Katrina
Chinese sales
Skype Chat
Linda
Katrina
Chinese sales